for more information, please visit the product page. ????????? ?????????????????? cui .com 09/13/2017 1 of 6 series : AE10-UW description: dc-dc converter features ? 10 watts ? high operating temp -40 to +70c ? 4,000 vac isolation ? ul 1741 approved; en 62109 approved ? board mounted ? input voltage range of 200~1,500 vdc ? low ripple & noise ? ovp protection ? output short circuit protection model input voltage output voltage output current output power ripple & noise 1 effciency 2 range (vdc) (vdc) min (a) max (a) max (w) max (mvp-p) typ (%) AE10-UW-s5 200~1500 5 0 2.0 10 300 64 notes: 1. measured at nominal input, 20 mhz bandwidth oscilloscope, with 10 f electrolytic and 1 f ceramic capacitors on the output. 2. measured at 800 vdc input voltage, full load. 3. all specifcations are measured at ta=25c, humidity < 75%, nominal input voltage, and rated output load unless otherwise specifed. part number key base number AE10-UW - s xx output voltage date page
for more information, please visit the product page. ?????????????????? cui .com date 09/13/2017 page 2 of 6 cui inc series : AE10-UW description: dc-dc converter input parameter conditions/description min typ max units operating input voltage 200 1500 vdc under voltage shutdown shut-down range turn-on range 170 180 185 195 vdc vdc current at 200 vdc at 800 vdc at 1500 vdc 120 30 16 ma ma ma inrush current at 200 vdc at 800 vdc at 1500 vdc 30 80 150 a a a input fuse 15 a / 1500 vdc (external) output parameter conditions/description min typ max units maximum capacitive load 6,000 f voltage accuracy 2 % line regulation from low line to high line, full load 1 % load regulation from 0% to full load 1 % delay time from vin = 0 v to 90% of rated ouptut voltage 2 s switching frequency 65 khz temperature coeffcient at full load 0.02 %/c protections parameter conditions/description min typ max units over voltage protection 8 vdc over current protection automatic recovery 120 320 % short circuit protection continuous, automatic recovery safety and compliance parameter conditions/description min typ max units isolation voltage input to output for 1 minute 4,000 vac safety approvals csa (ul 1741), en 62109 conducted emissions cispr22/en55022, class a (external circuit required, see figure 2) radiated emissions cispr22/en55022, class a (external circuit required, see figure 2) esd iec/en61000-4-2, contact 6kv/air 8kv, class b radiated immunity iec/en61000-4-3, 10v/m, class a eft/burst iec/en61000-4-4, 2kv, class b (external circuit required, see figure 2) surge iec/en61000-4-5, line-line 1kv, class b (external circuit required, see figure 2) conducted immunity iec/en61000-4-6, 10 vr.m.s, class a magnetic feld immunity iec/en61000-4-8, 10 a/m, class a mtbf as per mil-hdbk-217f, 25c 300,000 hours rohs 2011/65/eu
for more information, please visit the product page. ?????????????????? cui .com date 09/13/2017 page 3 of 6 cui inc series : AE10-UW description: dc-dc converter environmental parameter conditions/description min typ max units operating temperature see derating curves -40 70 c storage temperature -40 85 c storage humidity non-condensing 95 % altitude see derating curves 5000 m solderability parameter conditions/description min typ max units hand soldering for 3~5 seconds 350 360 370 c wave soldering for 5~10 seconds 255 260 265 c mechanical parameter conditions/description min typ max units dimensions 125.00 x 75.00 x 40.00 [4.921 x 2.953 x 1.575 inch] mm case material black fame-retardant heat-proof plastic (ul94v-0) weight 300 g mechanical drawing units: mm [inch] tolerance: 0.50[0.020] pin diameter tolerance: 0.10[0.004] pin height tolerance: 1.50[0.059] in high vibration environments, this series should be mounted with screws. tightening torque: max 0.4 n*m pin connections pin function 1 -vin 2 +vin 3 nc 4 -vout 5 +vout nc=no connection recommended pcb layout top view
for more information, please visit the product page. ?????????????????? cui .com date 09/13/2017 page 4 of 6 cui inc series : AE10-UW description: dc-dc converter derating curves 50 ambient t emper ature (c) output load (% ) -40 70 60 100 40 06 07 0 80 20 0 -20 20 40 80 50 ambient t emper ature (c) output load (% ) -40 70 60 100 40 06 07 0 80 20 0 -20 20 40 80 temperature derating curve (200~300 vdc input voltage) temperature derating curve (300~1500 vdc input voltage) input vo ltage (vdc) output load (% ) 200 60 100 40 1500 80 20 0 2000 altitude (m) output load (% ) 0 60 100 40 5000 80 20 0 load vs. input voltage derating curve (at 25c) load vs. altitude derating curve efficiency curves 200 400 600 800 1 000 1200 1400 1500 74 72 70 68 efficiency (% ) 66 input v oltage (vdc) 64 78 80 82 76 10 20 30 40 50 60 70 80 90 100 80 75 70 65 efficiency (% ) 60 55 load current (%) 50 85 effciency curve effciency vs. input voltage effciency curve effciency vs. load current
for more information, please visit the product page. ?????????????????? cui .com date 09/13/2017 page 5 of 6 cui inc series : AE10-UW description: dc-dc converter figure 1 table 1 +v o -v o tv s + +i nput -i np ut +v in -v in fu se c1 c2 rl dc -d c emc recommended circuit fu se c1 c2 tv s rl +v in -v in +v o -v o +i np ut -i np ut r1 r2 r3 r4 c3 c4 c5 c6 lc m ld m c7 c8 c9 c1 0 dc dc - table 2 figure 2 recommended external circuit components fuse 15 a/1500 vdc c7, c8, c9, c10 104k/275 vac c3, c4, c5, c6 47 f/450 vdc r1, r2, r3, r4 1 m?/2 w ldm 330 h/1 a lcm 7 mh/1 a vout (vdc) fuse c1 (f) c2 (f) tvs 5 15 a / 1500 vdc 1 120 smbj7.0a application circuit note: see also table 1. notes: 1. c1 is a ceramic capacitor used to flter high frequency noise. 2. c2 is electrolytic and is recommended to be high frequency and low resistance. for capacitance and current of the capacitor, refer to the datasheet provided by the manufacturer. capacitance withstand voltage derating should be 80% or above.
for more information, please visit the product page. ????????? date 09/13/2017 page 6 of 6 cui inc series : AE10-UW description: dc-dc converter cui offers a two (2) year limited warranty. complete warranty information is listed on our website. cui reserves the right to make changes to the product at any time without notice. information provided by cui is believed to be accurate and reliable. however, no responsibility is assumed by cui for its use, nor for any infringements of patents or other rights of third parties which may result from its use. cui products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safet y or effectiveness. headquarters 20050 sw 112th ave. tualatin, or 97062 800.275.4899 fax 503.612.2383 cui .com techsupport@cui.com rev. description date 1.0 initial release 09/13/2017 the revision history provided is for informational purposes only and is believed to be accurate. revision history
|
